|
Contact us
Changzhou Donggan Machinery Co.,Ltd.
Contact: Chen Renhua
Phone: 13901507123 13861255658
Address:Changzhou Zhenglutown
Tel: 0519-88675141
Fax: 0519-88677561
Zip:213115
E-mail:dongfangdry@163.com
|
|
|
SYH series of three-dimensional motion mixer |
| SYH series of three-dimensional motion mixer because the mixing drum has multi-directional motion, it makes raw material inside the barrel cross-mixing points, high mixing effect, uniformity of up to 99.9%, the maximum load factor up to 0.9 (a conventional mixer 0.4 ~ 0.6), mixing time is short, high efficiency. The machine body design unique mixing barrel, barrel body wall after fine polishing, no dead ends, no pollution to raw material, convenient in discharge, easy in clean and so on. |
|
WLDH series horizontal ribbon mixer |
| WLDH series horizontal ribbon mixer by the container, spiral mixing blades and transmission components; helical blades generally made double or triple the outer spiral pooled material from both sides to the central inner spiral from the center to the material both sides of the conveyor, the formation of convective mixing. The volume can be made circular, so that a jacket used in the reaction, and dried. |
|
CH series channel mixer |
| CH series channel mixer for mixing powder or wet material, so that the main materials in different proportions mixed. The machine at the contact with the materials are made of stainless steel, with a small blade gap barrel body, no dead mixing, stirring shaft ends with a sealing device which can prevent the material spilled outside, use the button to move the hopper control, easy to discharge. Widely used in pharmaceutical, chemical, food and other industries. |
|
WZ series weightlessness mixer |
| WZ series weightlessness mixer with a strong, efficient mixing is characterized by a horizontal cylinder of two counter-rotating constant stirring, the special arrangement of the blades ensure that the material radial, circumferential, and axial directions to form a combined cycle in a very short time to achieve uniform mixing. |
|
30B efficient universal grinder series (group) |
| 30B Series Universal mill group consists of highly efficient grinder, ESC materials collection boxes and ESC vacuum cleaner. Solve the material in the process of crushing dust flying. The principle of work is material into the crushing chamber, collide with each other under the impact of high-speed rotation of activities between chainring and fixed gear tooth plate by shearing, and friction between the materials are crushed by sieving. the needed powder. |
|
WFJ series of micro-grinder |
| WFJ series of micro-mill by the host, auxiliary equipment, electrical control box consists of three parts, with a winnowing, non-sieve, uniform size and other properties, and continuous processing, for the pharmaceutical, chemical, food and other industries brittle crushed material. |
|
ZS Series Vibrating Sieve |
| ZS Series Vibrating Sieve from the hopper, vibration chamber, coupling and motor. There are eccentric wheel, rubber software, spindle, bearings and other components. The adjustable eccentric weight can drive to the motor through the spindle center line, the centrifugal force generated in a state of imbalance, that makes raw material form vortex in the sieve. The amplitude of the weight adjuster can be adjusted according to different raw materials. |
|
FS Series Square Vibrating Sieve |
| FS Series Square Vibrating Sieve, sieve is expected out of the screen box, vibration source and absorber composed of three parts. Frame and screen box connected with 4-6 soft rubber shock absorbers fixed up and down, the boot that centrifugal force is generated, the amplitude of an eccentric block, corresponding to the shock absorber control, the need to achieve the best performance, so that the material has a parabolic shock and screening process loose. |
|
